About time I posted on here

Wow, over a month since I last posted any progress on the layout. Well, I certainly have a ton of reasons for my recent layout building inactivity. First and foremost, my wife and I hosted Thanksgiving so not only was I busy with getting the house ready, but I also wanted to keep the layout and train room neat and clean for visitors. After that, it was finals. In other words, layout was on the back burner.

Now that the semester is over, I've manged to take on a few long-overdue projects. First among them was moving the track lights around to better illuminate parts of Horseshoe Curve and Altoona.

 

I'm still fine-tuning things but the new setup seems more effective. Ultimately, I'd like to replace the CFL bulbs with LEDs, since the latter are dim-able and put the track lights on their own circuit. 

Another item I crossed off my to do list was installation of more Digitrax UP5 panels. I added an additional panel near the entrance to Johnstown yard and the other near the Gallitzin industries.

 

While I was at it, I also added a cup holder near Gallitzin too. After all, a stable place to set one's beer is always a must. Now, I am ultimately planning  to buy a UR90 panel, which will let me go wireless. So why the UP5s? Well, they are there as a backup. If for whatever reason, the wireless isn't working, I still have the panels at all the main switching areas and the layout can still be operated.

And speaking of DCC and operations, I decided it was time to acquire a few more throttles. I opted for the Digitrax UT4. Unlike the "Super Throttle" that came with my system. These feature only basic functions and can't program decoders.  But that's really all you need for operators anyhow. 

 

The last project I tackeled was getting one of the Gallitzin switching areas, glued down, wired up and operational.

 

This project required an handful kludges to get done. Foremost among them was covering up the short section of incline that brings the siding down from the main line. Normally, one would use plaster cloth for this task.However, I hadn't any on hand and didn't want to go out. For mountains, I usueally use paper towels dipped in plaster of Paris, but I was out of plaster mix too. Undaunted, I remembered something from elementary school art class and diluted some Elmer's glue. I dipped the paper towels in this mixture and let it dry over night. That was the ticket, the flex gaps in the riser were covered and I had a firm place to lay my track.

The next problem I ran into was I was out of cork roadbed. Since the one hobby shop in my area is never open when I'm off from work and I didn't ant to buy a whole case for a handful of sidings, I took a throwback to my early N Scale days. On my first two N Scale Layouts, the Table Rock diorama and the PR&Y, I fashioned my own roadbed from foam sheets sold at my local Michael's. I decided to do the same thing here. All told, it's the same amount of work as the cork stuff, and for a siding, it's more than adequate. 

It also turns out, I was out of Peco insulated rail joiners. However, I had a pack of Atlas Code 80 joiners. Good idea in theory, but in practice, not s much. Turns out the Atlas joiners are a tad too narrow for the Peco rail. So I had to spend a good bit of time gashing the joiners wider with an Exacto knife until they fit. 

So despite all the kludge jobs, I was able to reliably back my L1 down each siding without the slightest hiccup. With that result, I'm calling this project as success. I'm kind of excited to have more operating opportunities.

 

Take a model train to work day 2015

This has nothing to do with the layout, but it's still fun and gives me a chance to run a lot of my non-Pennsy equipment guilt free. Each year on the Friday before Thanksgiving, the publisher of Model Railroader magazine and the World's Greatest Hobby campaign hold Take a Model Train to Work Day. Since I work in customer service, this is a great oportunity to share the hobby with others.

I have a small portable layout that's base on the John Galt Line form Ayn Rand's novel Atlas Shrugged.

Here's the layout at the entrance to our lobby.

Since I work at a South Carolina Welcome Center, I tried to tie things in with our mission by putting out information about our state's railroad-related attractions.

Given the display's location, I decided to feature motive power from railroads that served the Palmetto State. The real Hmapton & Branchville #44 lives at the state railroad museum in Winsboro, SC. Since being built by Baldwin in 1927, she's only left the state once to be used in a TV show.

More Progress at Gallitzin

It is definitely full steam ahead at Gallitzin. I started thing off by getting the piece of foam in between the Gallitzin and Portage Tunnels to the correct height. The I set about hacking away one end of it with my hot knife to form a gradual slope down to track level. I also test fit some of the structures I plan to use there including Model Power's Railroad Hotel, Cornerstone's Jim's Repair Shop, Woodland Scenic Filler' up and Fixer'up and a few DPM buildings.

While I was at it, I situated another Rix Early Highway Overpass across the westbound tracks. Again, this is merely a mockup at this point, but I think it looks darn good. Rather than use the supplied pier, I opted for a pair of Chooch Enterprises stone abutments. These will need to be weathered before being situated.

On the subject of weathering, I weathered the Route 53 overpass. I mainly used black chalk, since this thing would be covered with cinders and soot from passing steam locomotives. It's hard to tell from the above photos. Also hard to tell from the photos is that I painted the rails underneath bridge. Always a laborius process, yet it yields awesome results.

Mocking up Gallitzin

These past few nights I've been busy slicing and dicing pink styrofoam and mocking up the two ends of Gallitzin.

The first area I worked on was the area around the tunnels. I started by taking all those Model Power house kits I've assembled and cutting some foam steps for them to sit on. In Gallitzin, many of the houses are set into the hillside. While I'm trying to take a more impressionistic approach, this was something I definitly wanted to recreate.

At present, I'm not sure if I will keep the two rows of houses coming down the hill or go with just one. But that's why I do a mock up first. After I live with it a while, I can change things.

The slab of pink foam in the foreground of the above photo will be raised up so the buildings are about two inches aboove the tracks and a Rix "Early Highway Overpass" will carry the road across the tracks. 

The second area I started working on was the western end of Gallitzin, where PA Route 53 crosses the tracks on an overpass. Aside from being a popular railfan location, the bridge provides a very nice scene transition. 

Rather than try to model the prototype bridge exactly, I used another Rix kit, well two of them actually. The bridge itself is still a work in progress and needs to be weathered. However it's a very nice fit for the area and even mocked up looks great in the setting. The Rix kits themselves are quite nice. They go together in about five minutes, the pieces have very little, if any flash on them and they are quite flexible. You can build a bridge to just about any length. 

My next project will be to get the rails painted, ugh. Then I will start making things permenant.

2014-15 Layout Progress Report

I can't believe I've been at it for two years now. I must say, I like how the layout is turning out. At this time last year, I updated you on the layout progress and set some goals for the next year. So in that spirit, here's this years progress report:

Track: 

Yard Tracks: 100% Complete

Industrial Sidings: 50% Complete. All that remains is to lay the track in Gallitzin. The Johnstown sidings and Southfork Branch are in.

Scenery:

Last year I set a goal of completing Horseshoe Curve and the Altoona Shop complex. I'd say Horseshoe is about 95% complete and the Altoona Shop about 75% complete.

Wiring:

Main Lines, Altoona Yard, Southfork Branch and Johnstown Industry sidings 100% Complete

Last year I also set a goal of installing additional cabs for operation. As you well know, I decided to dump cab control in favor of DCC, rendering last year's goal a mute point. So on that note...

DCC Conversion:

System Installation: 95% Complete. I would like to add additional UP5 panels at various points around the layout and eventually go wireless.

Locomotive Conversion: This depends on the fleet.

Pennsy Fleet: About 70% complete. All road locomotives have decoders. the switch engines still require them.

Conrail Fleet: 0% Complete. These are older locomotives that are hard to convert.

Norfolk Southern Fleet: 80% Complete, all but three locomotives equipped.

Goals for Next Year:

My primary focus for the forseeable future will be on Gallitzin. I'm confining the area of focus to between the Western Portals of the tunnels and the Route 53 overpass. I would like to have all structures in place, lighted and general topology in place by this time next year.

I would also like to get on with the DCC conversion and get the rest of the fleet equipped as time, money and patience allow. I also want to acquire more throttle.

Another goal I have is to finally start planning the operating scheme of the railroad. As mentioned elsewhere in this blog, realistic operation and the ability to host operating sessions were two of the original design goals. 

So that's about it for this year's progress report. Let's see how things shake out over the next 12 months.

On to Galltizin!

Hurrah hurrah hurrah! Horseshoe Curve is largely done. I finally girded my loins enough to make a trip through the access hatch to finish with the ground cover. Yes, the area still needs some more trees, but I'm pondering the whole situation. So until then, I feel the curve is in enough of a state of completion that I can move on. So yay, I  finally get to scratch the whole "I want to do something else on this layout" itch.

It turns out that "something else" is going to be Gallitzin. Gallitzin is a small town and home to the famous tunnels of the same name. Now, up until this point, the area I've been modeling has been rural with few structures. Well, that's going to change in a big way as I start modeling an actual town. All of those Model Power house kits I've put together over the past year or so will find a home here. 

Adding to the challenge of modeling Gallitzin is the topology. Nothing is level. In fact the whole town kind of resembles San Francisco only without the cable cars and hipsters. Each of the aforementioned houses will be set into the hillside. 

Now, as with previous parts of the layout, I won't be trying to duplicate Gallitzin exactly. Rather I'll merely attempt to capture the flavor of the area. This will also allow me to add some industry to the area and give my local freights something to do.

One of those industrial areas will be served by the eastbound tracks and will include Model Powers Brewery, which I've expanded with American Model Builers Transfer Building kit and Cornerstones "Medusa Cement." The westbound tracks will serve a metal fabricator and a feed, seed and implement dealer.

I'm setting the boundary for this section of the layout at PA Route 53, which is where the center peninsula returns to the walls. When this section is finished, about half of the layout will be sceniced.

Sound-Equipped Locomotives

Up until just recently, the idea of sound-equipped locomotives never much appealed to me. Admittedly, my previous experience with them was in O-Gauge and they made such racket that the novelty wore off pretty quickly. Also, when I started converting my fleet to DCC, I decided to splurge and add a sound decoder to my N&W J. I have to say, I way pretty underwhelmed. I mean how much sound could you really get out of a dime-sized speaker?

Then, a couple of weeks ago Bachmann surprised us all when they announced a sound value K4. Needless to say I snapped one up. Unlike my J, the sound on this loco was impressive. It's just loud enough to be heard but not deafeningly so. Just yesterday, I finally took delivery of my Broadway Limited E7s, which also are equipped with sound. These two are impressive with sound at just the right volume. Suffice to say, I'm hooked. I can't wait for my BLI M1 to get here so I can further increase my stable of sound-equipped locos.

Here are the BLI E7s leaving Johnstown:

The K4 Rounding Horseshoe Curve:

In other news, I haven't done much of anything on the layout itself lately. But I really need to get myself motivated to finish Horseshoe Curve and move on.