The I1s Project

Here's my completed model of a Pennsylvania Railroad Class I1s 2-10-0. This was one of the most involved kitbash projects I've ever undertaken. As mentioned previously on this blog, there's a huge dearth of Pennsy steam available in N Scale. In fact unless you want to spend a fortune on brass, your options are: the Minitrix K4 pacific, the Minitrix B6 0-6-0, the Minitrix 2-10-0 (which requires a good bit of kitbashing) the Bachmann 0-4-0 and the ultra rare Black River E6 Atlantic. Anyway, on to the blow-by-blow.

I started out with a Minitrix 2-10-0 (More about that locomotive here: [Link]). First I modified the hell out of the chassis so I could slide the shell backwards and make the steam pipes line up with the cylinders.

The modified Chassis and pilot truck.

Next, I cut the pilot off and added a piece of styrene between it and the rest of the shell. I made the two front air tanks from styrene rods, which I chucked in my electric drill and ground against a jeweler's file to get the rounded ends. The pipe connecting the tanks is actually a very short piece of wire.

I painted most of the shell Floquil "Brunswick Green," the cab roof Floquil "Tuscan" and the smokebox Floquil "Graphite." The tender shell was already painted in the correct colors as it was a leftover from another project.

I swapped the stock tender for a Bachmann USRA Medium-distance tender, which not only more closely matches the prototype, it also has 8-wheel pickup. A common malody among all three Mintirix steamers is poor power pickup and adding the 8-wheel pickup to the tender does wonders for their performance.

The "Pennsylvania" decals on the tender is from Microscale and the cab numbers are Woodland Scenics dry transfers.

After that was done, I sprayed the tender and engine shells with Testors Dulcote and used various shades of gray pastels for weathering.

All in all this project was intense. It took me about 2 months of working on and off to complete.

Addendum:

This locomotive has since been sold, ironically to finance the purchase of a brass I1. See you in about three years!

The Table Top is Built

Oh man, what a day it's been. But it's been a good day. I managed to get the layout's tabletop built. I started out with a layer of 1/4" luan plywood screwed to the benchwork. I then topped it with 2" styrofoam insulation. Easy right? Wrong! See since my wife and I both have a 50-mile round trip commutes, fuel efficiancy was the main factor in us buying our cars, a Toyota Yaris and Corolla respectively. Both cars a great for saving gas but for hauling 4x8 sheets of plywood? Not so good.

Thankfully Home Depot had us covered and provided a rental flatbed truck. But Home Depot gave with one hand and took with other. See for some stupid reason, absolutely none of their stores in Spartanburg County carry 2" styrofoam. So my wife and I had to tromp all the way to Greenville to buy the stuff. Kind of annoying but not a lot I can do about it.

Once I got the stuff home I cut the plywood down to size with a jig saw and used a hot knife on the foam. The latter should definitely be done in the garage with the door open. The fumes from the pink stuff are quite nasty.

The origional plan was to simply go with 2 layers of 2" foam. That was before I found out it cost $32 a sheet. Needless to say after I tallied up what 12 sheets would cost, I picked my jaw up of the floor and rethought the whole plan.

The next step is to get some cork road bed and some risers and inclines from Woodland Scenics. At this rate I should be able to start laying track by the end of the month.

A Major Milestone Reached, The Benchwork is Done!

Well benchwork is finished. All in all I'd say this phase of the project went rather smoothly. The next step is covering the top with a layer of 2-inch thick styroafoam. Originally I had planned on going with four inches of foam. But at $32 per sheet, I realized that was going to cost me a whole lot of Benjamins. At any rate, that will probably happen in the new year.

Finished Cornerstone's George Roberts Printing Kit

This Cornerstone kit is a nice, generic industrial building that should look right at home in central Pennsylvania. It took me nearly a week to get this thing put together, mostly because I've become much fussier about painting my buildings since the last layout.

I started off by painting the concrete parts of the walls Floquil "Concrete." Next I painted the brick sections Floquil "Boxcar Red," which makes a nice brick color. I painted the roof, water tower roof and supports and fire escape Floquil "Grimy Black." The water tank got painted Floquil "Roof Brown."

After all the paint thoroughly dried, I used poster paint to simulate brick mortar. Once all that was finally done, I actually put the kit together, hit it with a coat of weather wash applied the decals and sprayed on some Dulcote and called it done. I must say I'm really glad I took my time with the painting. The building came out awesome.

In other news, I finished some more benchwork.

I added the raised section over the "smurf door" and another six foot section along the wall. As you can see this is about as much as I can do until Cherokee is dismantled. Since I have a sneaking suspicion Santa is going to bring me some new motive power for Christmas, I still want to have a functioning layout for a little while longer. As such Cherokee gets a little stay of execution.

Major Benchwork Progress

After taking a break for Thanksgiving, I decided to get back to work on the benchwork. I actually built the narrow section along the wall shortly after the initial 4 x 8 section but just never got around to posting it. Yesterday I built the large peninsula in the center of the room.  Nothing really to exciting to report here, just a whole lot of measuring, sawing, clamping, drilling  and screwing.

The main challenge will be the back corner. As you can see, there is a small white door that leads into the attic space. There's no storage beyond it but it does allow access to the duct work and therefore must be able to open. That particular section of benchwork will be four inches higher than the rest and topped with a thin sheet of plywood. The rest of the layout will be topped with four inches of pink Styrofoam, so it should be seemless.

Now, I would have been well served to remember the old adage about measuring twice and cutting one. It turns out the room was a foot wider and a six inches longer than I first thought. So yay, a happy accident! My railroad empire is even more vast than first thought.

Also you can probably see I added some new track lights. These came from Lowes and are equipped with 60 watt GE Reveal bulbs. I prefer the Reveal bulbs as they show everything in their true colors.

I also decided it was time to go ahead and acquire a fire extinguisher. The one I selected is the dry chemical type. It's rated to put out A, B and C-class fires. An A fire is buring debris, like wood. A B fire is buring oil and chemicals and a C fire is electrical. All three types of fire can occur in train room so it's best to have an extinguisher intended for all three.

Another Trip to Pennsy Fantasy Land

If you thought my last paint job got the rivet counters' shorts in a knot, this one will have them foaming at the mouth and going into palpitations. The Pennsy at least owned Alco FAs. The same cannot be said for the EMD BL2. But come on, it was only $20 at the local hobby shop.

Anyway, when I got the engine, it was unpainted black plastic. I gave it a quick coat of Floquil "PRR Brunswick Green" applied the decals (Microscale for the lettering and keystones, Woodland Scenics for the numbers), and painted the ends of the handrails Floquil "Bright Gold."

I have a few more motive power projects waiting in the wings. But as soon as turkey day passes, it's back to benchwork.

Meanwhile, Back at the Paint Shop...

With the holidays rapidly approaching, work on the layout is on hiatus for now. With that being the case, I've turned may attention back to painting locomotives.

I spent the better part of two weeks on re-painting and decaling this set of Lifelike Alco FA-1s. I started out by stripping off the the original paint and weathering with denatured alcohol. With the factory paint removed, I repainted the unit with Floquil "Tuscan Red." I know, the Pennsy never had a Tuscan red FA, but I thought it would look cool, so I went ahead with it.

I painted the truck side frames and fuel tank Floquil "Grimy Black." I also painted the back of the power pickups Floquil "Engine Black" to conceal their appearance.

The decals are from Microscale with the exception of the numbers. Those are Woodland Scenics dry transfers. Let me tell you, those stripe decals are a huge pain-in-the-ass to deal with. They're almost impossible to get straight. In fact, up close, this engine looks like it was painted by a bunch of drunks!

I finished things up with some Dulcote to seal the decals. The B Unit is still a work in progress, but its the same basic procedure there.

So all in all, not a bad project but definitly not my best work either.